Bova Rigger Pro Safety Boot

Upper:

• Cut from 2.0mm – 2.2mm Full Grain Printed Water Buffalos sides.
• Two Pull straps for ease of entering the boot.

Lining:

• The vamp lining is from a hi-tech needle-fibre blend with excellent perspiration absorbency and treated with Ultra-Fresh* technology to impart hygienic and anti-bacterial properties to the material.

Top-Sock:

• The Energiser Poron / EVA top sock is from a combination of polyester and wool, with excellent perspiration absorbency, bonded to a layer of EVA.
• The Poron inserts at the ball and heel of the top sock offer optimum support where it is needed most, ensuring dynamic impact compression and a gentle rebound with every step.
• The top sock responds to weight and temperature, moulding itself to the foot, resulting in fewer aches and pains.
• The top sock has been treated with Ultra-Fresh* technology to impart hygienic and anti-bacterial properties to the material.

Sole:

• The sole is from dual density PU / Vibram Rubber.
• The midsole is from a low density flexible Polyurethane with a shore hardness of 0.45 - 0.5
• The outer sole is from Vibram Rubber with a SRC slip resistance rating.
• The boot soles have been subjected to voltage of 20kV ac rms for 60 seconds, with specific reference to paragraph 5 of the Eskom specifications 34-232 - no break-down occurred.
• The sole can withstand temperatures up to 300˚C.
• The sole is non-conductive.
• The boot comes standard with an anti-penetration midsole

 Toe Cap:

• Steel toe cap - extra-wide fitting
• Can withstand an impact load of 200 joules

The Rigger Boot has been tested to comply with EN / ISO 20345 specifications and carries the EN/ ISO 20345 certified mark. This product is manufactured in South Africa by BBF Safety Group, in an ISO 90001-accredited factory.